Wall Opening

Parameters to control the size of the wall opening.

Parameters Type Group
Width Length Type: Dimensions
Height Length Type: Dimensions
Rough Width Length Type: Dimensions
Rough Height Length Type: Dimensions
Frame Dimensions Yes/No Type: Constraints
Type | Dimensions

Width

When the parameter Frame Dimensions is disabled, the Width parameter applies to the width of the wall opening.

Width with Frame Dimensions value = disabled

When the parameter Frame Dimensions is enabled, the Width parameter applies to the outer frame width and the wall opening = Width + (Rough Distance Sides x 2).

Width with Frame Dimensions value = enabled

The optional wall overlap with the frame (interior & exterior) is controlled via the Render Offset parameters.

The optional distance between the outer frame and the wall opening is controlled via the Rough Distance parameters.

Type | Dimensions

Height

When the parameter Frame Dimensions is disabled, the Height parameter applies to the height of the wall opening.

Height with Frame Dimensions value = disabled
Height with Frame Dimensions value = disabled

When the parameter Frame Dimensions is enabled, the Height parameter applies to the outer frame width and the wall opening = Height + Rough Distance Top + Rough Distance Bottom.

Height with Frame Dimensions value = enabled
Height with Frame Dimensions value = enabled

The optional wall overlap with the frame (interior & exterior) is controlled via the Render Offset parameters.

The optional distance between the outer frame and the wall opening is controlled via the Rough Distance parameters.

Type | Dimensions

Rough Width

The system parameter Rough Width is not used.

Type | Dimensions

Rough Height

The system parameter Rough Height is not used.

Our families are used all over the world, which makes naming parameters really tricky.

Terms aren't always the same, and if they are, they might have a different meaning between what we and you refer them to.

Please get in touch with us , if you come across one of those cases, if the documentation isn't clear enough, is missing some scenarios, or if you just want to have a chat.