All-in-One Kitchen Unit
Release Notes
Updating your All-in-One Revit Family ...
You should backup your Revit Projects as well as the All-in-One Families before updating.

Every All-in-One Revit Family comes with the actual Version as Prefix to clearly indicate the current Version of the All-in-One Revit Family:
e.g. RFAM19356_Kitchen
RFA ... Revit Family
M / I ... Metric / Imperial
19 ... Unique Family ID
356 ... Version 3.5.6

If you want that the new Version updates all your previous Versions within your Revit Project, you would need to rename the Family within your Revit Project as the new updated version received prior to loading the updated Version. If you do not rename the previous Version, the new version will be loaded additionally rather then updating the previous Version you have in use.

Version 3.5.6 (Released September 19th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.5.6 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following bug fix:
  • FIX: This release adds the parameter DRAW HANDLE VISIBILITY to the type catalog files.
Version 3.5.5 (Released September 19th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.5.5 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following bug fix:
  • FIX: This release solves an issue where the middle hob of the cooker was visible even the cooker was turned off.
Version 3.5.4 (Released June 15th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.5.4 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following modifications:
  • MODIFIED: This release changes the reference for the vertical position of the Door from the bottom to the top of the Door Panel.
  • MODIFIED: This release changes the following parameter names:
  • Draw Handle Length => Draw Handle Width
    Draw Handle Offset => Draw Handle Offset From Top
    Door Handle Height => Door Handle Offset From Top
    Door Handle Length => Door Handle Height
    Door Handle Position => Door Handle Offset From Side
    Door Handle Thickness => Door Handle Depth
    Draw Handle Thickness => Draw Handle Depth
Version 3.5.3 (Released March 31st, 2011)
Download Update (.EXE)
Download Update (.ZIP)
This update contains bug fixes, including the following:
  • FIX: This release fixes an issue with the width of the panel frame hinge side
  • FIX: This release fixes an issue cutting the glass opening not correct when the DRAWERS COUNT was more then zero and the DRAWERS ON BOTTOM was active
  • FIX: This release fixes an issue with the SINK DEPTH OFFSET
  • FIX: This release fixes an issue with the drainer visibility when the unit width is less then 900mm (35")
Version 3.5.2 (Released March 16th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
This update contains bug fixes, including the following:
  • FIX: This release fixes an issue with a wrong position of the door and drawer
  • FIX: This release fixes an issue where the top was not aligned with the unit front when front offset was zero
  • FIX: This release fixes an issue where the door handle was wrong positioned (side and bottom)
  • FIX: This release fixes an issue where the void cut the door incorrect when door above drawer
  • FIX: This release fixes an issue where the wall unit was slightly (2mm) higher then setup via the parameter WALL UNIT HEIGHT (offset from the Level)
Version 3.5 (Released March 4th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The 3.5 Update is a major update and it is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following new features, improvements, modifications and bug fixes:
  • NEW: This release adds shelves to all corner units
  • NEW: This release adds material parameter for the drawer as well as the additional drawer
  • NEW: This release adds visibility control for drawer handle
  • NEW: This release adds parameter to control the depth of shelves as well as dividers
  • MODIFIED: This release changes the center position of the tab to the center of the main sink
  • IMPROVEMENT: This release brings an optimization as well as reduction of formulas to improve performance
  • IMPROVEMENT: This release simplifies the adjustment of the bottom bas height
  • FIXED: This release fixes an issue with the visibility of the glazing when Solid Door is activated
  • FIXED: This release fixes an issue with the unit height in connection with the worktop, backsplash as well as sink
Version 3.4.1 (Released February 14th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.4.1 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following bug fixes:
  • FIX: This Release fixes an issue which has limited the angle for the mitered Worktop to 45 degrees.
Version 3.4 (Released February 2nd, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.4 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following new features, improvements, modifications and bug fixes:
  • NEW: This Release adds the functionality to setup a 45 degrees Corner Unit.
  • NEW: This Release adds the functionality to setup any mitered Units to build corner situations i.e. other then 90 degrees.
  • NEW: This Release adds Visibility Graphic Overrides for any elements of the Unit to get more control over the visibility of certain unit elements (i.e. sink, cooker, backsplash, shell, bottom base, symbol lines, etc.).
  • IMPROVEMENT: This Release improves the visibility settings of the Door Panels when the unit is setup as a corner unit.
  • IMPROVEMENT: This Release allows now to setup shelves in the corner unit.
  • MODIFICATION: This Release has renamed Parameters to make them easier to understand.
  • MODIFICATION: This Release has changed the Parameter for the offset of the Kick-plate as well as the Backsplash from Type to Instance parameters.
  • FIX: This Release fixes an issue with the parametrics of the sink.
  • FIX: This Release fixes an issue with the visibility of the Top when used as a corner unit.
  • FIX: This Release fixes an issue which has now shown the Symbol Lines correctly for the Sliding Door Panels.
Version 3.3.5 (Released January 17th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.3.5 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following bug fixes:
  • FIXED: This Release resolves an issue which did not allow to disable the worktop for corner wall units.
  • FIXED: This Release resolves a constraint issue with the drawer thickness, by editing in the Family Editor.
Version 3.3.4 (Released November 30th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.3.4 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following modifications:
  • MODIFIED: This Release changes the Familycategory to Casework which allows to show the Kitchen Units cutted in sections.
Version 3.3.3 (Released October 29th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.3.3 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following bug fixes:
  • FIX: This Release resolves an issue with the Imperial Type Catloag File which resulted in an error while loading it.
  • FIX: This Release resolves an issue which did not show the Elevation Symbol Lines when Drawers were activated together with Door Panel(s).
Version 3.3.2 (Released October 14th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.3.2 Update is recommended for all users using the All-in-One Revit Kitchen Family Imperial Version. It includes the following improvement:
  • IMPROVEMENT: The imperial Type Catalog File has been updated to US Standard Kitchen Unit sizes.
Version 3.3.1 (Released August 31st, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.3.1 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes the following general fix:
  • FIX: This Release resolves an issue with the position of the left side panel.
Version 3.3 (Released August 18th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 3.3 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes general fixes, improvements and new features:
  • FIX: This Release shows now the wall hung units also in plan view.
  • FIX: This Release includes several fixes of the cooker hob positioning.
  • FIX: This Release includes a fix of the cooker plate alignment.
  • FIX: This Release shows now the wall hung units also in plan view.
  • FIX: This Release shows now the Bottom Profile of the Wall Unit in the right position.
  • FIX: This Release shows now the wall hung units also in plan view.
  • FIX: This Release shows now the dimesion reference correct.
  • FIX: This Release allows now to place the Units next to eachother without aligning (Units snap once placed next to eachother.
  • FIX: This Release includes several geometry fixes.
  • MODIFIED: This Release has optimized Parameter for showing 2D as well as 3D Symbollines.
  • MODIFIED: This Release takes now the position of the Drawer Handle from the top of each drawer. This was changed to to the new feature of various Drawer Heights, to easier adchieve the position of the Drawer Handle.
  • NEW: This Release allows now to add a second size of Drawers instead of the Swing Door Panel.
  • NEW: This Release allows now to show the Symbol Lines also in 3D.
  • NEW: This Release allows now to control the offset of the Worktop on all 4 sides and the Backsplash moves automatically with the worktop edge.
Version 3.2 (Released July 19th, 2010) Download Update
The 3.2 Update is recommended for all users using the All-in-One Revit Kitchen Family. It includes general fixes and improvements that correct issues, including fixes that:
  • add parametric functionality to setup a general Corner Unit which can be combined with other Units from this Revit Family
  • add parametric functionality to offset the kickplate, backsplash as well as Worktop Front Profile separate on each side for units joining the general Corner Unit
  • resolve issues with the symbollines of the doors shown incorrectly
  • resolve issues not showning the glazing of the door panels in other then fine mode
  • resolve issues selecting the Revit Family in the area around the geometry
  • resolve issues not showning the handles of the drawers in other then fine and medium mode