All-in-One Door
>
>
>
Release Notes
Release Notes
Updating your All-in-One Revit Family ...
You should backup your Revit Projects as well as the All-in-One Families before updating.

Every All-in-One Revit Family comes with the actual Version as Prefix to clearly indicate the current Version of the All-in-One Revit Family:
e.g. RFAM21181_Door
RFA ... Revit Family
M / I ... Metric / Imperial
21 ... Unique Family ID
181 ... Version 1.8.1

If you want that the new Version updates all your previous Versions within your Revit Project, you would need to rename the Family within your Revit Project as the new updated version received prior to loading the updated Version. If you do not rename the previous Version, the new version will be loaded additionally rather then updating the previous Version you have in use.

Version 1.8.1 (Released September 30th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.81 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following bug fixes:
  • FIX: This Release fixes an issue where the middle rail of the door panels (leafs) were not visible in certain parameter settings.
  • FIX: This Release fixes an issue where the glazing of the door panels (leafs) were not visible in certain parameter settings.
  • FIX: This Release fixes an issue where the number of glazing bars were incorrect if just vertical or horizontal glazing bars were set.
  • MODIFIED: This Release modifies various parameter names (related to glazing bars, glazing leaf opening)
  • MODIFIED: This Release modifies various parameter settings in the included type catalog file (handle position)
Version 1.8 (Released September 26th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.8 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following new features, modifications as well as bug fixes:
  • NEW: This Release adds the possibility to control the width and height of the door via the door panel (leaf) dimensions rather then the clear or rough width.
  • NEW: This Release adds glazing bars to door panels (leafs) that can be controlled separately for the left & right panel (leaf).
  • NEW: This Release adds parameters that allow the door panel (leaf) 'Middle Rail' to setup with radiuses as well as better positioning.
  • NEW: This Release adds parameters to adjust a normal double door to a double egress door.
  • MODIFIED: This release modifies the parameter names for the door handles.
  • FIX: This Release fixes an issue where the door panels (leafs) were not correct positioned in certain setups.
  • FIX: This Release fixes an issue where the glazing were unconstraint in Revit 2012.
  • FIX: This Release fixes an issue where the position of the door handles were not acccordingly to the parameter settings.
  • FIX: This Release fixes an issue where the door handle of some panels (leafs) were visible in coarse mode.
  • FIX: This Release fixes an issue where the top profile of the door panel (leaf) were not accordingly to the parameter settings.
Version 1.7.1 (Released July 25th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.7.1 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following bug fixes:
  • FIX: This Release fixes an issue where the wall was cut from a void if one of the sidelights was inactive at certain parameter settings.
  • FIX: This Release fixes an issue where the threshold would have an equal side offset even just one side was set.
Version 1.7 (Released July 20th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.7 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following improvement:
  • IMPROVEMENT: This Release adds a side offset to the threshold in order to enable the threshold to run across the sidelights.
  • IMPROVEMENT: This Release adds parameter to control the threshold separate for interior and exterior in order to enable the door to be used for interior as well as exterior.
Version 1.6.3 (Released May 19th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.6.3 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following bug fix as well as new features:
  • FIX: This Release fixes an issue where the symbol lines are not shown in coarse mode.
  • NEW: This Release adds schedule parameter for the outer dimensions of the swing & fix door leafs.
Version 1.6.2 (Released April 12th, 2011)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.6.2 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following fix:
  • FIX: This Release fixes an issue with the material assignment of the Interior Left Swing Handle.
Version 1.6.1 (Released November 8th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.6.1 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following fix:
  • FIX: This Release fixes an issue which did not show the 2D Panel correct in plan view.
Version 1.6 (Released October 21th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.6 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following improvement:
  • IMPROVEMENT: The entire Parameter structure has been reorganised and grouped to logical groups.
Version 1.5.3 (Released October 14th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.5.3 Update is recommended for all users using the All-in-One Revit Door Family Imperial Version. It includes the following improvement:
  • IMPROVEMENT: The imperial Type Catalog File has been updated to US Standard Frames.
Version 1.5.2 (Released September 20th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.5.2 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following bug fixe:
  • FIX: This Release resolves an issue whith the 3D Symbollines.
  • MODIFIED: This Release lets you now localize the Hingeside for the Symbollines as Type Parameter. This resolves the Problem that the Symbol Lines were displayed differently at the Door Ledgend.
Version 1.5.1 (Released September 1st, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.5.1 Update is recommended for all users using the All-in-One Revit Door Family. It includes the following bug fixe:
  • FIX: This Release resolves an issue whith the Door Frame when offset from the Wall Edge more then 100mm towards interior or exterior.
Version 1.5 (Released August 13th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.5 Update is recommended for all users using the All-in-One Revit Door Family. It includes general fixes, improvements and new features:
  • FIX: This Release shows the Symbol Lines correct on both sides of the Door Panel.
  • FIX: This Release allows to control the visibility of the wood Door Stop Profile with a Type Parameter.
  • FIX: This Release calculates the Panelwidth correct when the Panel Thickness is automatically set to the Rebate Depth (Flush Door Panel).
  • NEW: This Release shows the Swing of the Pivot Door also between Pivot Point and Frame with a Symbol Line.
  • NEW: This Release allows now to control the visibility of the Symbol Lines in 2D and 3D separate with two global Type Parameter. The Symbollines can now also be controlled via Graphics override.
Version 1.4 (Released August 10th, 2010)
Download Update (.EXE)
Download Update (.ZIP)
The Version 1.4 Update is recommended for all users using the All-in-One Revit Door Family. It includes general fixes, improvements and new features:
  • NEW: This Release allows to switch the groove within the Steel Frames on/off.
  • NEW: This Release allows to adjust an additional Door Stop Profile for the Wood Frame.
  • NEW: This Release allows to control the visibility of the Panel Symbol Lines in Elevation and 3D View (Visibility Override).
  • NEW: This Release allows to schedule the width of the Sidelights and the height of the Transom Window.
  • NEW: This Release has added an additional Instance Parameter for describing the Hinge Side of a Single Door including an additional Schedule Parameter.
  • NEW: This Release has added a schedule Parameter showing the existence of the Door Stop Profile at the Wood Profile.
  • MODIFIED: This Release shows a zero value for the Schedule Parameter .Fix Panel Width when the door is set to be a single swing door (one swing, no fixed).
  • MODIFIED: From this Release all Accessory Control Parameter are Instance Parameter.
  • MODIFIED: This Release has now assigned all Elements of the Door to a Subcategory.
  • FIX: This Release shows the Symbol Lines in Elevation and 3D View correct on all Door Panels.
  • FIX: This Release does not select the Door by hovering around the Door Area
Version 1.3 (Released June 30th, 2010)
Download Update (.EXE)
The 1.3 Update is recommended for all users using the All-in-One Revit Door Family. It includes general fixes and improvements that enhance the stability, functionality and correct conversion issues with the Imperial Type Catalog, including fixes that:
  • add the functionality of pivot doors supported with all Frame Types
  • improve the functionality of the Symbol Lines as it is now possible to sync the Symbol Lines with the Panel or adjust the Panel separate from the Symbol Lines
  • resolve an issue that does not show parts of the door (e.g. the glazing) correct within Revit 2011
Version 1.2 (Released Mai 12th, 2010)
The 1.2 Update is recommended for all users using the All-in-One Revit Door Family. It includes general improvements that enhance the stability, functionality, including fixes that:
  • improve the support for showing the door opening on dimension lines - Parameter added that allows to switch between the clear opening or the rough opening to show on dimension lines
  • improve the adjustability of the vertical door position and adds a parameter for a Rough Distance at the bottom of the door
  • improve the functionality to schedule the accessories showing the setup for each door panel and each side as clear text
Version 1.1 (Released April 29th, 2010)
The 1.1 Update is recommended for all users using the All-in-One Revit Door Family. It includes general fixes and improvements that enhance the stability, functionality and adds the Imperial Type Catalog, including fixes that:
  • resolve an issue that causes an error inserting any Sliding Door from the Type Catalog
  • resolve an issue that does not show the door elements in all views
  • improve the usability of the Type Catalog as the Parameter have been sorted by priority (i.e. Height, Width, Tick Boxes for switching between Swing and Sliding Door, etc.)
  • improve the functionality of the Symbol Lines as the parameter for the angle of the Swing Symbol Line has been added to the Instance Parameters. Additionally we have added a Tick Box that allows you to activate the Synchronization between the Opening Angle of the Door Panel and the Opening Angle of the Symbol Line or you can control the Opening Angle of the Panel and the Opening Angle of the Symbol Line separate